![]() ![]() If you have a 360 E you won't have any outputs other than HDMI, optical audio and 3.5mm audio so you'd have to go for a HDMI-DVI cable or adapter plus a 3.5mm to phono cable for audio. Your DVI audio input there is analogue though, so you'd need to get that from the 360 using one of these adapters and a phono cable. Your audio input is different there though so you would need a female phono to 3.5mm adapter to add to the 360's VGA cable.ĭVI - The 360 doesn't have a DVI output but DVI video is essentially the same as HDMI video just without the audio, so you can get really simple and compact passive adapters or even just a HDMI-DVI cable. Goes where it says PC In (and yes it should work even though the 360 isn't a PC). You need a specific cable for this, there are Microsoft ones and third party ones. Uses the 5 connectors under where it says Component In. The Microsoft component cables also include composite connectors and there's a switch on the cable connector to select between SD and HD. Plugs into the L/R audio and yellow video connectors where it says AV IN in the bottom right, or can go into one of the scary sockets with a composite to start adapter.Ĭomponent video - Analogue HD video. The official cables well have good shielding and are widely available second-hand.ĪV/composite video - standard Microsoft AV cable that came with the Xbox 360 for SD analogue video. Whichever solution you go for, try to get the official cable (except for HDMI/DVI, doesn't matter there). Xbox 360 VGA HD AV Cable with Optical Toslink or Stereo Audio (Gold Plated Connectors) by: thiartj Description: Xbox 360 HD VGA cable for connecting your Xbox 360 to a VGA video display. At least the Xbox will be better at scaling than your TV. ![]() If you know your TVs actual resolution (listed in the manual or online) you can set the Xbox 360 to output at that so you can get theoretically lower input lag. Sometimes, the only way to make it not overscan is to use VGA or DVI (because they're meant for computers).Īlso, older TVs may not actually be either 1920×1080 or 1280×720. ![]() Some TVs won't show the entire picture (overscan), cutting off the edges. No fiddling with pixel clock, interference, phase, etc. Digital connections (DVI, HDMI) will be inherently better than analog (YPbPr, VGA). So long as your TV works logically, any one of these should be fine. You'll need to connect audio with one of these. Get an HDMI to DVI cable and you'll have perfect digital video. You'll need an RCA to 3.5mm adapter to get audio.ģ) DVI/HDMI. Audio and video slots straight into TV without any other cables/adapters.Ģ) VGA.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |